topic Re: DG8041W No port fowarding in Broadband

DG8041W No port fowarding

parsonsagain — Mon, 24 Jan 2022 12:51:42 GMT

I was exchanged this router because I was originally I was supplied with a Sagemcom that was forever dropping its wifi as the chip would overheat.

Now i've discovered with the DG8041w i cant port forward (common fault) so what's the answer?

Change ISP?

Who does the R&D on hardware for TalkTalk (not very good).

Re: DG8041W No port fowarding

KeithFrench — Mon, 24 Jan 2022 12:55:28 GMT

There are only a small group of ports that cannot be forwarded on the DG8041W, these are:-

TCP Ports 22, 23, 80, 443 & UDP 53.

I have never found any WiFi reception problems as you describe with the Sagemcom. I would think that was just a faulty one & it forwards all ports.

Re: DG8041W No port fowarding

Debbie-TalkTalk — Mon, 24 Jan 2022 12:56:53 GMT

Hi parsonsagain

Would you like me to send another Sagemcom WIFI hub?

Thanks

Re: DG8041W No port fowarding

parsonsagain — Mon, 24 Jan 2022 13:05:17 GMT

I Need to forward 22, 443 so how? with a DG8041W or do i have to go back to a Sagemcom again?

As i said, I no longer have the Sagemcom, but if memory serves me right talktalk sent me three in total none of which worked after all the tweaks talktalk made (So no vote from me).

It wasn't wifi reception, it was complete loss, the radio modem chip would overheat and crash (again an issue talktalk finally admitted knowledge of)

I've never been sent so many routers from a provider its a bit ridiculous.

Re: DG8041W No port fowarding

KeithFrench — Mon, 24 Jan 2022 13:05:37 GMT

I have had no loss of signal from the Sagemcom.

Re: DG8041W No port fowarding

AllyM — Mon, 24 Jan 2022 13:40:30 GMT

There's always the option of researching and buying a third party router that does everything and performs the way you want it to. you're not tied to using a TalkTalk supplied device.

Re: DG8041W No port fowarding

parsonsagain — Mon, 24 Jan 2022 14:13:23 GMT

Hi Debbie, if you wouldn't mind.

Maybe the Sagemcom now has different firmware?

Re: DG8041W No port fowarding

Debbie-TalkTalk — Mon, 24 Jan 2022 14:23:10 GMT

Hi parsonsagain

Can I just check, which FW version was on the old Sagemcom hub?

I can send a new Sagemcom hub and there is new firmware being rolled out at the moment but this wont be on the new router straight away. Our Products Team are rolling out the firmware to Sagemcom hubs in batches.

Thanks

Re: DG8041W No port fowarding

parsonsagain — Mon, 24 Jan 2022 15:01:24 GMT

Sorry i've no record of this.

Re: DG8041W No port fowarding

Debbie-TalkTalk — Tue, 25 Jan 2022 08:19:01 GMT

Hi parsonsagain

I have ordered another Sagemcom hub, please allow 24-48hrs for this to arrive.

Let us know how the connection compares with this router.

Thanks

Debbie

Re: DG8041W No port fowarding

parsonsagain — Tue, 25 Jan 2022 11:02:53 GMT

Will do, many thanks.

Re: DG8041W No port fowarding

Debbie-TalkTalk — Tue, 25 Jan 2022 11:11:42 GMT

Hi parsonsagain

Thank you 🙂

Debbie

Re: DG8041W No port fowarding

parsonsagain — Fri, 25 Feb 2022 17:24:38 GMT

Hi, Well router arrived and swapped and I've sent the old one back, Thanks.

However on that router I couldn't port forward, now on this router it wont allow a Nat loopback.

So what i've gained i've lost.

Why do isp's do this sort of stuff?

Re: DG8041W No port fowarding

KeithFrench — Fri, 25 Feb 2022 22:02:27 GMT

OK, the Huawei will allow NAT loopback on some ports, but I expect that will be tightened up in a future firmware release. TalkTalk's position on this is that they consider NAT loopback to be a security risk. No other TalkTalk router permits this. All that you have to do as a workaround is to use the device's private IP address (typically 192.168.1.x)