cancel
Showing results for 
Show  only  | would you rather see results for 
Did you mean: 
Need help?

Your guide to main phone sockets

No ratings

Your main phone socket is a white plastic box built into your wall, usually in your hallway or near your front door. It’s bigger than a normal phone socket because it’s the point where the external phone line comes into your home.

It's best to connect your router to your main phone socket. You can also use your main phone socket to troubleshoot problems with your internet, particularly if it has a test socket inside. 

Not all houses have one, but if yours does, it'll look like one of the below:

 

Non NTE master socket

Non NTE

NET 5 master socket

NTE 5

NTE 5C master socket

NTE 5C

FTTC master socket

FTTC

NTE 2000 master socket

NTE 2000

NTE 5C MK 4 master socket

NTE 5C MK 4

 

Openreach can replace or relocate your main phone socket and phone line for a fee. If you need a new main phone socket or you want to move or replace your existing one, please contact us to arrange an engineer visit.


There are two types of main phone socket. The way you connect your phone and broadband depends on which one you have.

 

Standard main phone socket

Standard main phone sockets have one port on the front, which means you need a microfilter to connect your phone or router. You'll also need to use microfilters in every other socket you're using in your home. 

 

Super_Router_standard_socket.png

Pre-filtered main phone socket

Pre-filtered main phone sockets have two ports on the front, which means your line is already split between your phone and broadband connection. You can plug your phone and router straight into a pre-filtered main phone socket without using any microfilters. 

Super_Router_pre_filtered_socket.png

Connecting to your test socket

Your test socket is inside your main phone socket. It lets you bypass the internal wiring in your house and connect directly to the phone line outside, making it the ideal place to test your internal wiring for faults.

  • Main phone sockets that have two ports or one port with a horizontal line across the front contain a test socket.
  • Main phone sockets that have one port without a horizontal line don't have a test socket. If this sounds like yours, please don't try to unscrew the faceplate.
test socket yn-01.png

 

Here’s how to connect your router to your test socket:

  1. Carefully unscrew the faceplate on your main phone socket with a screwdriver. If your main phone socket doesn't have screws, squeeze the sides of the faceplate to detach it
  2. Now gently pull the faceplate towards you
  3. With the faceplate removed, you'll see the test socket inside. It looks similar to the phone port on the front of your main phone socket but without the sliding cover
  4. If you're testing your router, plug a microfilter into the test socket
  5. Then plug your router's grey broadband cable into the microfilter's ADSL/DSL port

If your connection improves whilst you're connected to the test socket, then the problem is probably in your home. However, if the problem continues, then there's likely a fault in your local area.

 

Mike
Hi, I’m Mike did you find my article useful?

Looking for help ?

We have a reduced support team available at the moment, which means the wait times to speak to us may be longer than usual. Why not manage your account or get help with your services online using one of the below options