cancel
Showing results for 
Show  only  | would you rather see results for 
Did you mean: 
Need help?

TP-Link Archer VR900 setup

Reply
Highlighted
Participant

Hello.

Static IP gives me a lot of details which I don't know. Dynamic IP still gives me status "Disconnected". Can't find mpoa.

 

staIP.png

Highlighted
Participant

Hi @ferguson.

Tried your way, still gives me "Disconnected" status.

Participant

VR900 manual DSL light says this. I'm struggling between flashing and off. Troubleshooting Note 1 says I should hard reset my router which I actually did and it doesn't help.

DSL.png

Highlighted
Community Star

OK, go to Advanced > Operation Mode. Have you got that set to DSL Modem Router Mode?

Highlighted
Participant

Yes, it is all the time on this mode since I started topic.

That's my actual cable setup. I don't know, maybe cables are wrong?

DSC_0001.JPG

DSC_0003.JPG

  

Highlighted
Community Star

Well I'm all out, unless anybody else comes up with anything here then I can only suggest you contact TP-Link directly. It might conceivably be faulty, you could also try connecting it on a different line if you get the opportunity.

Highlighted
Participant

Okay. It can't be faulty. I was using it at my previous houses and it was working flawlessly. I was using it on last day before I moved here where I am right now.

Highlighted
Community Star

Hi @BartasX if you look at your 7th post and slide 3 can you see the pppoe drop down if you can change this to mpoa you should be in with a chance

I don't work here and all my opinions are my own.