Static IP gives me a lot of details which I don't know. Dynamic IP still gives me status "Disconnected". Can't find mpoa.
Tried your way, still gives me "Disconnected" status.
VR900 manual DSL light says this. I'm struggling between flashing and off. Troubleshooting Note 1 says I should hard reset my router which I actually did and it doesn't help.
OK, go to Advanced > Operation Mode. Have you got that set to DSL Modem Router Mode?
Yes, it is all the time on this mode since I started topic.
That's my actual cable setup. I don't know, maybe cables are wrong?
Well I'm all out, unless anybody else comes up with anything here then I can only suggest you contact TP-Link directly. It might conceivably be faulty, you could also try connecting it on a different line if you get the opportunity.
Okay. It can't be faulty. I was using it at my previous houses and it was working flawlessly. I was using it on last day before I moved here where I am right now.
Hi @BartasX if you look at your 7th post and slide 3 can you see the pppoe drop down if you can change this to mpoa you should be in with a chance