@ddtalk Running an HG633 in Bridge mode, Hardware version:H.1.01 Software version: v1.15t and it certainly shows Security Logs as an option although I don't have entries in that log, do you have that option & what have you tried to get an entry in the log (I could try replicating), I wonder if a later version has that option disabled
@chtechie I didn't know there was a bridge mode on the HG633 though I do run two lines with the two routers connected.
Normally I have multiple entries in the Security Logs with regular trash attacking my routers, both of the HG633 just have a blank screen now, the firmware version has been at v2.00t for a long time so I presume talktalk have altered the settings in one of their remote updates?
I've tried switching off and on.
I don't know why the security log are missing but you could you try resetting the router to factory default setting then monitor over the weekend to see if the security logs are being updated again
@OCE_Chris Easier said than done!
Firstly I have an extremely grumpy person in this household uses this router, taking it down can be at "risk of life".
Secondly, I have a lot of settings in use
I'll try a factory reset followed by a restore settings before building up the courage to do a clean setup (if necessary). Its funny that both our routers have lost their Security Logs, the other router has much less customisation, just limited DHCP range iirc.
If you don't hear from me again you will know the first reason occurred.