Hey, I'm Michelle and I wanted to tell you about our community and how it's packed full of useful information, answers and has a horde of active members waiting to help or just to say hey! We know forums can be a little daunting at times, so here are some of my useful tips to help you get the most out of the community:
Search is the quickest way to locate the information you're after, use the big red box above. If you don't find what you're after you can always post your own question.Search now
Prefer to jump straight into the community? Checkout the yellow "browse" tab over on the left hand side, here you'll find the entire community at your fingertips.Try now
Had a peek around the community already? If so you'll no doubt want to join us, just hit register below and follow the instructions. Don't worry I'll still be here to help once you've registered.Register now
Originally Posted by fredgolightl How about entering the router (192.168.1.1) and clicking Advanced, then Maintenence, then Device, and selecting the Configuration File tab and download the current config file - then you can reset the router and if it doesn't work you can just restore the current downloaded/backed-up state by uploading the config file you've downloaded.
Or check the Basic>WAN setup. Mine is like this:
nas_0_38 PPPoA Connected 2.97.xxx.xxx 1
nas_0_65 Bridge Connected 1
WAN connection: Enable
VPI/VCI: 0 / 38
Service list: INTERNET TR069
Connection type: PPPoA
Service type: UBR Without PCR
Encapsulation mode: VCMUX
Authentication mode: Auto
Connection trigger: OnDemand
Idle time: seconds 1800
MTU: manual Size: 1432
Any setting not listed has no checkbox ticket/value entered.
Originally Posted by fred sheehan Have you tried different wireless channels?
Laptops very often need a wireless adapter driver update to use WPA2 wireless encryption properly, have a read of this topic for help with wireless issues;
Originally Posted by csidepc If you are having problems with all of your wireless devices, then logic dictates that it must be a problem with the router.
You mentioned a power outage. It's possible this has damaged the router.
I managed to "revive" a router that had a similar problem by running a firmware upgrade on it.
Whether this is possible depends partly on your level of experience:)
BTW I never trust router lights, they can be misleading if the router is malfunctioning.
Please can you create a new thread, we can then look into this further.