NEED SOME HELP?

We’re here 24/7. 365 days a year.
Ask questions. Find your answers. Connect.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Network Connector guide

Version History
Last update:
‎17-12-2021 10:36 AM
Updated by:

Network Connectors provide a convenient way to extend a wired connection from your router, without using long cabling. They are a great solution if your TalkTalk TV Box- or any other device that uses a wired connection- is far away from your router.

 

network connector 200px.png
PH3 Network  ConnectorsPH3 Network Connectors

 

You get two Network Connectors in a pack. Simply plug them in, connect one to your router and the other to your TalkTalk TV Box (or another device) using the Ethernet cables provided.

 

 

You can buy them in the TalkTalk accessories store or request them when you order TalkTalk TV:

  • If you order self-install, they will be delivered along with your TalkTalk TV Box
  • If you order an engineer installation, the engineer will bring them along when they install your TalkTalk TV box

If you’ve opted for an engineer Installation, but forgot to order them with your package, just let the engineer know on arrival. We'll set them up and charge them directly to your TalkTalk account.

 

Your Network Connectors can be used straight out of the box:

Black Connectors

  1. Plug one Network Connector into a wall socket close to your router
  2. Connect one end of the Ethernet cable to the yellow Ethernet port on the Network Connector
  3. Connect the other end of the Ethernet cable to the yellow Ethernet port on the back of your router
  4. Switch on the power at the socket. If your Network Connector has an on/off button, press it now
  5. Plug the second Network Connector into a socket close to your TalkTalk TV box or other device
  6. Connect the other Ethernet cable to the yellow Ethernet port on the bottom of the Network Connector
  7. Connect the other end of the Ethernet cable to the Ethernet port on your TalkTalk TV box or other device
  8. Switch on the power at the socket. If your Network Connector has an on/off button, press it now
  9. Your Network Connectors are now set up
    Wired_PLA_connected_YouView_box-01.png

White connectors

  1. Connect one adapter to one of the LAN ports on the router, connect adapter to a wall socket and switch on
  2. Connect the other adapter to the TV box or other wired device and connect to a wall socke and switch on
  3. Press the Pair button on one adapter for the PLC LED starts blinking
  4. Then press the  Pair button on the other connector for 1 second (both buttons need to be pressed within 2 minutes)
  5. Wait till the PLC  LED's on the adapters are solid - this indicates a secure network between the adpters

 

 

You can use as many Network Connectors as you like in your home. 

  1. Plug the new Network Connector you want to add into the wall socket
  2. On the new Network Connector, press and hold the pair button until all 3 lights blink once
  3. On the Network Connector already connected to the router, press and release the pair button. The power light will start blinking
  4. Now press and release the pair button on the new Network Connector. The powerline light will flash green when it's successfully paired
  5. Follow steps 1-4 to add any additional Network Connectors

 

Black connectors

This table shows the light status of the connector
Light Status Description
Power light Solid Power on and ready
Off Power is off. Make sure the Network Connector is switched on
Blinking If you've pressed the pair button, your Network Connectors are trying to pair
Powerline light Solid Your Network Connectors have paired successfully
Off No other Network Connector found
Blinking green The connection quality is good
Blinking amber There's some interference on the line, but this shouldn't cause issues
Blinking red The connection quality is poor. Try moving the Network Connectors closer together
Ethernet light On Ethernet cable is connected
Blinking Ethernet cable is connected and data is being sent over the connection
Off No Ethernet connection. Make sure the Ethernet cable is connected properly

White connectors

This table shows the light status of the connector
LED Colour Status Description
Power   Off The device is NOT receiving electrical power.
Green Solid The electrical power is on.
Green Slow blinking The device is in power saving mode.
PLC   Off The device doesn't pair with other network connectors, or is powered off.
Green Solid The device is connected with a network connevtor.
Green Fast blinking The device is pairing with network connectors.
Red Solid The signal of the network connector Is poor: try plugging the adapter closer
to your router or modem until the PLC turns green.
Ethernet   Off No Ethernet cable is detected on the Ethernet port.
Green Solid

The Ethernet cable is connected properly.

This table gives instructions to pair connectors
Button Description
Pair Press and hold for about 1 second to start pairing.    
Press and hold for about 6 seconds (the Power LED will be off and then light up again) to restore the adapter to factory default.    

 

If you're having problems, take a look at fix a problem with your Network Connectors.

 

 

 

 

 

Further Help

Don't forget you can manage your account, check your services online and even ask any questions in our community

My Account

View your bills & keep tabs on your usage.

Service ​Centre

New: See how your connection is performing.

Community

Here 24/7, 365 days a year, why not post your question?