For queries about your TalkTalk broadband service.
on 24-10-2025 10:19 AM
I'm getting periods where my router (Sagemcom Fast 2) frequently disconnects the broadband. It'll run fine for a few weeks, then we get another episode of instability. We're in one now, hence this post.
Running the TT line test shows no problem with the line - instead it suggests there are Wifi connectivity issues in the house. There aren't!
Looking in the Router Admin, it always shows the Downstream Noise Margin as 0dB. Surely this is the problem - I've always understood the minimum stable noise margin to be about 6dB.
So is it the line or the router? The router has already been replaced by TT twice before - so we're on our third one since moving here 3 years ago.
All very frustrating!
on 24-10-2025 02:07 PM
Hi, siphosethu,
Sorry, I'm just on my way out now and won't be back until about 4:00pm
Can we do it then?
Cheers
Mike
on 24-10-2025 01:57 PM
Hi there @mikeyb200, please confirm if you are currently a home so we're able to run checks on this for you. Thanks
24-10-2025 01:41 PM - edited 24-10-2025 01:42 PM
Hi TalkTalk,
Please can you investigate this intermittent fault? The light on this router, every so often, starts flashing orange.
Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?
on 24-10-2025 01:20 PM
Hi Keith,
Yes.
on 24-10-2025 01:19 PM
Hi @mikeyb200
Just to confirm, then, when you get the failure now with the current router, do you still get the flashing orange light? If so, that needs investigation first.
Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?
on 24-10-2025 12:12 PM
I thought the flashing orange was the normal indication of a dropped broadband connection, so I didn't think to mention it specifically.
I should explain about the 3 routers.
The first one died pretty comprehensively - no broadband connection and no wifi either. I could only communicate with it vie an ethernet cable.
It was replaced with a second one which worked, but was extremely slow, with very poor throughput. I didn't have it long - a TT engineer came and tested the line, declared that router faulty and replaced it with the one I currently have.
This third one works, but, as I say, has these episodes of dropping the broadband.
on 24-10-2025 11:50 AM
I don't think you mentioned the flashing orange light in my our opening post. So this is definitely err other an intermittent line we or f as ultimately it the DLM needs optimisation.
Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?
on 24-10-2025 11:49 AM
Hi Keith,
Thanks - I'm grateful for your help.
Mike
on 24-10-2025 11:47 AM
I never said where the fault lies, merely that the 0db could be a bug. The line has been tested before and is OK, you have had several routers & you say the WiFi is OK. The tracert should prove where the problem is.
I will read your PM a bit later this afternoon and get back to you.
Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?
on 24-10-2025 11:44 AM
Hi @Divsec ,
Thanks
on 24-10-2025 11:38 AM
Hi Keith,
Thanks for picking this up. Yes, I mean the Fast5364, my bad.
I'm PM-ing you the tracert result, but I'm curious as to why you think it's not simply external connectivity that's the problem?
The wifi always works fine - I can, for instance, always jump into the Admin Console on the Router via Wifi when the broadband itself is down, and see that there is no broadband connection.
And when down, the router flashes its orange light, which AFAIK only means one thing - no broadband connection.
Cheers
Mike
on 24-10-2025 10:56 AM
Hi @mikeyb200
I assume that you mean either the Sagemcom FAST5364 or 5464, the latter also known as the WiFi Hub 2? The Downstream Noise Margin always shows up as 0db, even in an old screenshot that I have. This display might be a bug; I can't prove it as I no longer have an ADSL line.
It should be easy enough to prove if this is a WiFi issue or not. Do you have a Windows PC connected via wireless? If so, run this command from the Windows Command Prompt:-
tracert google.co.uk
Then send me the output, ideally in a PM to preserve your privacy.
The information below is provided by TalkTalk. For confirmation, please contact @Lorrainef, the manager of the TalkTalk support staff on this forum.
KeithFrench is one of our valued Community Stars and can help with a range of issues related to wireless and networking. At times, he may ask you to send him test results via a Private Message to help analyse/diagnose an issue. Although Keith does not work for TalkTalk, he very kindly shares his time and knowledge to help others.
If you need further help or if we need to take any details such as personal information about your account, like phone numbers, account numbers, etc, one of the TalkTalk team will jump in and help out.
Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?
on 24-10-2025 10:47 AM
Hi @mikeyb200 your post has been escalated and you should hear soon