Can't send outgoing mail

[Foneman]

Hi Chris,

Thanks for the reply.

That was a typo error on my part.

My outgoing settings are smpt.talktalk.net but still showing,

Cannot send mail The username or password for mail.btinternet.com is incorrect,

is it possible that Bt is the carrier for my outgoing mail?

I have a recollection that when I moved from Pipex to Bt the outgoing server was Bt.

Other than that I fail to see why the TalkTalk server is not recognized.

[Foneman]

Many thanks, Gondola,

For all the information.

I will increase my password to 12-15 digits.

Best regards

[Gondola]

The settings are good but the password does not meet TalkTalk security requirements so you'll need to change and upgrade that so the outgoing server will accept the new stronger password.

The Reset password now button in the help article  Changing your email password will take you to password reset and recovery. You must use the master pipex email address not the alias address. The master address is of the form abcd12@dsl.pipex.com - an alias address will result in the 'no domain' error message.

If you have set up password recovery options, in advance for the master mailbox, that you recognise from the *****hints, then you can send your alternate email address a link or your mobile a 6-digit code to authorise a password reset.  If you haven't set up password recovery options then you can do so via webmail and the main settings menu item Update your reset details.

My recommendation is to exceed the minimum required and use a password of 12-15 multicase letters and numbers and a symbol. Created from multiple words gives an opportunity to memorise the password that, for security, needs to be unique to the mailbox.

[Foneman]

Hi Gondola,

Please see 2x pdf containing 4 photos

The outgoing messages are now going to the outbox.

Incoming messages are OK

Webmail is OK.

I tried to change my Pipex password with TalkTalk, but no Domain was found.

Please advise for future changing of password if it is not recognized by TalkTalk.

[Foneman]

Thank you, Gondola

I have all the talktalk settings installed as indicated by your reply.

I will arrange screenshots as you suggest.

[Gondola]

Take screenshots as the ones shown in this guide. Image edit to obscure the first part only of the email address and Username and upload here using the picture icon above this Reply area.

Guide to setup email for an IMAP account on the iPhone

From the home screen

• Tap Settings (cog icon)
• Tap Mail
• Tap Accounts (iOS 15 or 14) or
  

  Passwords & Accounts (iOS 13 or 12), Accounts & Passwords (iOS 11), Mail (iOS 10) or Mail, Contacts, Calendars (iOS 9)

• Tap Add Account
• Tap Other (bottom of the list)
• Tap Add Mail Account
  and enter your email account information
• Name: Your name, as you want recipients to see it
• Email: Your full TalkTalk Mail email address
• Password: Email password
  Description: Your choice of Mail account name
  Tap Next (top right)

• Select Account type: IMAP
  INCOMING MAIL SERVER
• Host name: mail.talktalk.net
• Username: Full TalkTalk Mail email address
• Password: Email password
• Incoming server port: 993
• OUTGOING MAIL SERVER (SMTP)
• Host Name: smtp.talktalk.net
• Username: Your full TalkTalk Mail email address (It's NOT optional)
• Password: Email password (It's NOT optional)
• Select Next and Save to create the Mail account

Now we need to set up the OUTGOING MAIL SERVER SMTP settings
And then return to the Account and tap Advanced to set up the INCOMING SETTINGS

Select the Mail account name Description you've just set up
OUTGOING MAIL SERVER

• Tap SMTP
  Make sure it is set as the primary server
• Server must be ON (green)

• Use SSL must be ON (green)
• Authentication: Password
• Server Port: 587
• Tap Done (top right)

Select top left arrow < Account (to return to the Account)

• Tap Advanced
  INCOMING SETTINGS

• Use SSL must be ON (green)
• Authentication: Password
• Server Port: 993

Select top left arrow < Account (to return to the account setup)

• Tap Done (top right)

[Foneman]

Thank you , Gondola

Account ----@dsl.pipex.com

My outgoing settings

My primary server is smtp.talktalk.net

Host name                 smtp.talktalk.net

Password                    ............

Use                              SSL

Server Port                587

Sending mail from ....@dsl.pipex.com

On screen message

Cannot send mail

The username or Password for mail.btinternet.com is incorrect

[Gondola]

To send pipex emails from your iPhone the Server must be set to ON and the outgoing server is smtp.talktalk.net using port 587 and SSL on and Authentication by Password using the full pipex email address as User Name and the pipex password. The User Name and password are not optional.

---

Foneman wrote: ...The smpt.talktalk.net server 587 for some reason is not allowing outgoing messages.

---

The correct TalkTalk server name is smtp.talktalk.net so what you may have entered is an incorrect server name and you have to use the TalkTalk server for pipex mail and the BT Internet server for BT Mail. You cannot send fully authenticated BT Mail from TalkTalk servers nor fully authenticated pipex mail from BT servers.

To send BT emails from your iPhone the Server must be set to ON and the outgoing server is mail.btinternet.com using port 465 and SSL on and Authentication by Password using the full BT Internet email address as User Name and the BT Internet email password. The User Name and password are not optional. 

If you need the settings checked visually, take screenshots, image edit to obscure the first part of the pipex email address and upload here using the picture icon above this Reply area.

[Foneman]

Hi Gondola,

My original question was I can't send emails from my iPhone.

I get a message that says " Bt internet username or password is incorrect "

When I moved from Pipex to Bt many years ago, my understanding was that Bt settings applied to my outgoing mail.

The smpt.talktalk.net server 587 for some reason is not allowing outgoing messages.

[Gondola]

Who are you replying to? What's the original question?