cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

NEED SOME HELP?

We’re here 24/7. 365 days a year.
Ask questions. Find your answers. Connect.

500mbps service downgraded itself to 100mbps

number666
Chatterbox
Private Message TalkTalk
Message 16 of 16

According to my Eero, I am now connected to a 100mbps line. Speed tests confirm this. A line test suggests that there is a possible fault, but then can't find one. I have been holding onto chat for tech support for just under 30 minutes. I suspect that they have now gone home.

0 Likes
15 REPLIES 15

Message 1 of 16

OK thanks, so the length shouldn't be a problem, it may just be a faulty cable then.

 

Chris

0 Likes

Message 2 of 16

10m I think

0 Likes

Message 3 of 16

Thanks for trying that, glad to hear that your speeds are back to normal. 5e and 6 are fast enough for your service. Cat7 should be fine too, it may just be an issue with that particular cable, how long is it?

Chris

0 Likes

Message 4 of 16

I notice that the working cable is a Cat5E. What's the optimum category? Thanks!

0 Likes

Message 5 of 16

Looks like it is the cable. Now back up to full speed on the old cable. Thanks!

0 Likes

Message 6 of 16

Yeah, I don't know why it would do this either, its just strange that everything from our side shows that your connection is 500Mbps but it showing on your side as exactly 100Mbps. I certainly think it's worth making sure that it is nothing to do with the ethernet cable.


Chris

Message 7 of 16

I'll try that, but when I first swapped it over I was getting 400mbps+... I'm confused as to how it would work as Cat7 and then change?

0 Likes

Message 8 of 16

OK thanks. It's just because it's saying exactly 100Mbps, wondering whether it's seeing the cable as CAT5. Would it be possible to test it temporarily on the shorter cable? You could also try the ethernet cable in the eero's other ethernet port if you haven't already


Chris

0 Likes

Message 9 of 16

Hi Chris.

No, but I'm using this: Ethernet Cable, Cat 7 Gigabit Lan Network RJ45 High-Speed Patch Cord Flat 10Gbps 600Mhz/s FTP POE

I was getting full speeds on it when I first plugged it in...but that was only a few days ago. The original cable was too short.

0 Likes

Message 10 of 16

OK thanks. Could you also check that the Ethernet cable is seated correctly too, in the eero and the ONT. Could you also confirm that you are using the ethernet cable supplied with the eero?
 

Thanks
Chris

Message 11 of 16

20241017_093858.jpg

 Thanks Chris. I'll try that later when my partner isn't working (as it's critical for her). As you can see, the Eero app is still convinced it's a 100mb line. I rebooted the ONT and the Eero last night.

0 Likes

Message 12 of 16

Hi number666,

 

I can see that the speed test results have dropped but the service still appears to be Fibre 500. Could you switch the ONT and eero off for 30 minutes, then switch back on and retest


Thanks

Chris

Message 13 of 16

Nope, hopefully they will pick this up early tomorrow.

number666
Chatterbox
Private Message TalkTalk
Message 14 of 16

Thanks Ferguson, I have done that. Do I need to do anything else?

ferguson
Community Star
Private Message TalkTalk
Message 15 of 16

Yes, they will have gone home long since I'm afraid.

 

If you would like the support team here to look into this for you make sure that your personal details including TalkTalk phone number and/or account number are complete on your community profile (click here) so that they can link your forum identity with your account and then wait for them to respond.