For queries about your TalkTalk broadband service.
on 20-09-2024 01:09 AM
It is 10 months now that the router connection keeps going off, 6 times today 19/09 /2024. We have had a B.T. engineer who could not fix it. Why should we pay for a very poor service???
on 24-09-2024 10:20 AM
Hi Michele, connection has been ok this last 2 days but was ok for 10 days after Reece the engineer came 2 months ago. Watch this space.
on 23-09-2024 09:01 AM
Morning Joe,
Openreach have now resolved the fault. How is your connection today please?
Thanks
Michelle
on 20-09-2024 12:12 PM
It can take between 48-72hrs for us to receive an update from Openreach but hopefully we'll know more by Monday.
Thanks
Michelle
on 20-09-2024 12:09 PM
Ok . Joe.
on 20-09-2024 12:06 PM
Hi again Joe,
Ok, the line test is now complete and no longer shows a loop fault, however the broadband line test is detecting a potential external line/joint fault so I've raised this straight over to Openreach now to complete an external line investigation and we will re-check the fault ticket for an update on Monday for you.
Thanks
Michelle
on 20-09-2024 11:52 AM
Hi Joe,
Ok thank you. I'll re-run the line test again now and will post back shortly.
Michelle
on 20-09-2024 11:51 AM
Hi again, i have plugged in the micro filter and plugged in the router only, telephones disconnected. Joe.
on 20-09-2024 11:34 AM
Hi Joe,
If you have a separate microfilter then you should be able to connect both the phone and router via the test socket. If you don't have a microfilter then please let us know and we can get one sent out for you.
Thanks
Michelle
on 20-09-2024 11:32 AM
Hi, the test socket is for a phone only as mentioned ages ago. I have an old filter socket that takes both.
on 20-09-2024 10:32 AM
Morning Joe,
The 5C Openreach socket should have a test socket below the faceplate. There should be clips on the side of the faceplate that you can squeeze slightly to carefully lift the front away (there may be wires attached to the back of the faceplate)
Thanks
Michelle
on 20-09-2024 10:28 AM
Hi Michele, the master socket does not have a router test socket, its a 5C model open reach mk4. Joe. Also the phone line still crackling as well.
on 20-09-2024 07:11 AM
Hi Joe,
I'm sorry to hear this. I've run a test on your line now which has detected a potential loop fault towards the property. Does your main socket have a test socket please? If it does then please can you connect the router directly at the test socket and we can re-run the line test again in this set up.
Thanks
Michelle