For queries about your TalkTalk broadband service.
on 08-04-2022 01:04 PM
Exact same problem that has been raised numerous times it seems and no fix yet so not sure what the point in raising a new topic is...
But anyway, go to static route page on the routers admin page, add a static route for:
192.168.2.0/24 to use gateway 192.168.1.97 on LAN interface, click the + sign to add it to the table and then click apply. You get a message to say the data was successfully saved but my entry has vanished from the static route table.
Im running firmware version SG4K10002828t.
Answered! Go to Solution.
on 12-04-2022 06:46 AM
Hello,
I'm glad to hear this and thanks for confirming 🙂
Thanks
on 11-04-2022 05:09 PM
Thanks so much, that fixed it for me
on 11-04-2022 08:08 AM
Hi owensy
Thank you 🙂
Your firmware has now been updated.
Debbie
on 11-04-2022 07:54 AM
Hi Michelle
Any time this morning would be great, im out the house until this afternoon.
on 11-04-2022 07:29 AM
Morning,
I'm sorry for the delay. The firmware can take up to 30 minutes to update and you won't be able to reboot the router when this is upgrading. When would be the best time today for us to update the firmware for you?
Thanks
on 08-04-2022 01:18 PM
Thanks Michelle and Keith
Community profile has been updated.
Is V130 being rolled out currently or still in testing/development do you know?
on 08-04-2022 01:14 PM
Hello,
Can you please update your community profile to include your:
We'll then look into this further. Please do not post this information on this thread. Once you've updated your profile please post in your topic to confirm it's updated.
Thanks
on 08-04-2022 01:12 PM
You need V130 for that to be fixed.
Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?
on 08-04-2022 01:07 PM