TV hub Remote

[Roycav194]

My TV hub Remote source button delete button and tv power button not working

[Tarmac1]

Try pressing with your fingers over all the buttons in a swiping movement from top to the bottom of the remote, this should release any “stuck” buttons.

[Karl-TalkTalk]

Hi

Check if the remote is paired correctly with your TV as follows : 

Your remote control will not auto-sync with your TV or Soundbar. If you would like to adjust the volume on your TV using the TV Hub remote, you can easily set it up by following the simple steps below.

1. Press the Home button on your TV Hub remote
2. Press the up arrow to select Settings (cog)
3. Select Remotes & Accessories
4. Select your connected remote (For example TalkTalk RC408)
5. Select TV/AVR Control
6. Follow the simple setup steps on your TV by pressing on Begin
7. After a short time you'll be asked to test your volume and confirm everything is working. If not, follow further steps on your TV to get yourself set up.

You'll now be able to switch between TV Volume mode and TV Hub volume mode by:

• Pressing Home and digit 2 together on your remote until the blue light blinks twice to switch to TV Hub volume mode
• Pressing Home and digit 1 together on your remote until the blue light blinks twice to switch to TV volume mode

See if the buttons work correctly after this.

Karl.