Get expert support with your Fibre connection.
on 24-02-2025 11:44 AM
Hi there,
I’ve been on Fibre 65 for the past 18 months with absolutely no issues but over the last few days I’ve had a series of drop outs.
Nothing (that I know of) has changed in my setup. I have tried running line tests and it says everything is fine. Not sure what to do now. Router resets don’t help.
Best wishes,
John
on 03-03-2025 12:35 PM
on 03-03-2025 12:30 PM
Hi Debbie,
Sorry for the late reply. The connection has been perfect since the engineer came. No drop outs at all.
Thanks again for all your help.
Best wishes,
John.
on 27-02-2025 02:39 PM
on 25-02-2025 01:21 PM
You're very welcome John 🙂
Michelle
on 25-02-2025 01:18 PM
Thanks Michelle and thank you very much for your speedy response and help.
on 25-02-2025 01:08 PM
Hi John,
I'm glad to hear this 🙂 I'll check back in with you in a few days to give you a chance to test the connection to make sure that everything is working as it should.
Thanks
Michelle
on 25-02-2025 01:06 PM
Hi Michelle,
Yeah the engineer has just been and fixed it. Apparently the socket was corroded and he thinks that was causing the issue.
on 25-02-2025 12:57 PM
Good afternoon John,
No additional updates as yet. Have you noticed if there are any engineers outside completing any work?
Thanks
Michelle
on 25-02-2025 06:53 AM
Morning John,
I can see that the fault has been assigned to an engineer to investigate this morning so hopefully it'll be resolved or we'll know more by this afternoon.
Thanks
Michelle
on 24-02-2025 12:31 PM
Hi John,
No problem 🙂 I'll hopefully have an update for you in the morning.
Thanks
Michelle
on 24-02-2025 12:23 PM
Thanks Michelle, really appreciate your help.
on 24-02-2025 12:22 PM
Hi John,
Ok thanks for confirming. I've raised this over to Openreach now to complete an external line investigation. I'll re-check the fault again first thing in the morning for an update for you and will post back here.
Thanks
Michelle
on 24-02-2025 12:09 PM
Hi Michelle,
I'm afraid we don't use a landline anymore so not sure if there's an issue with the voice service.
This is all we have on the socket (img attached).
Best wishes,
John.
on 24-02-2025 12:01 PM
Hi,
Thank you. I've run a test on the line now which has detected a potential fault. Are you experiencing any issues with your voice service such as noise on the line or no dial tone? Does your main socket also have a test socket? If it does then would it be possible to connect the microfilter, router and phone directly at the test socket so we can re-run the line test again in this set up please?
Michelle
on 24-02-2025 11:55 AM
Sorry Michelle, I've updated that now.
on 24-02-2025 11:50 AM
Hi John,
Can you please update your community profile to include your:
We'll then look into this further. Please do not post this information on this thread. Once you've updated your profile please post in your topic to confirm it's updated.
Thanks
Michelle