We’re here 24/7. 365 days a year.
Ask questions. Find your answers. Connect.
Sunday
So I have had the eero 6 pro for a few years now. I have an LG tv that won't connect to the router.
The connection is fine and everything is up to date on the eero. No issues except the TV not connecting.
Can anyone confirm if this is because of an old network adapter in the TV not being compatible with eero 6?
yesterday - last edited yesterday
"Personally, though, I would just buy a new TV."
I recently bought the TV below for the bedroom as we do not have an aerial socket in that room, TV progs play with no buffering on wi-fi and Netflix HD also works with no problem at all, at £119 its a steal.
Buy Bush 24 Inch 24HT24CA Smart HD HDR10 LED TiVo Freeview TV | Televisions | Argos
yesterday
You could buy a cheap network switch such as this:-
Remove your PC from the eero & connect the switch to it, then connect the PC back up to a spare port on the switch.
Then buy yourself a pair of powerline adapters, providing an ethernet connection over your mains electricity. One unit would connect to another port on the switch & the other to the TV's Ethernet port. However, both units must be on the same electrical ring circuit for this to work properly & should be connected directly to wall sockets, not extension leads etc:-
Personally, though, I would just buy a new TV.
Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?
yesterday
Ahh damn. I see. So as i suspected i knew the eero was causing me difficulties.
Connecting via ethernet isn't an option for two reasons. One being there is only one ethernet connection on the eero that goes to my PC in living room.
Two: I have no way of getting a cable up to the bedroom.
yesterday
The eero 6 only supports 802.11g,n & ax, not 802.11b. The eero Pro 6 will therefore not support 802.11b either.
Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?
yesterday
@Michelle-TalkTalk has asked me to help you. If your TV only uses 802.11b, then it is very insecure and should not be used. However, I will have to look into the specs of your eero Pro 6 to see if it even supports that standard. Could you connect the TV via an Ethernet cable?
Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?
yesterday
Monday
The older talk-talk router was on the 2.4GHz band and the eero has a function that disables the 5GHz band to allow 2.4GHz to connect without interference. But sadly this doesn't work.
Monday - last edited Monday
I found the wi-fi specks for your monitor if these are correct cold this be the reason you are having problems -
802.11b is one of the oldest Wi-Fi standards. It supports a theoretical maximum throughput of 11 Mbps over short ranges using the 2.4GHz band.
Monday
I used a second eero 6 borrowed from a friend to extend Wi-Fi upstairs. But that made no difference to the situation.
Monday
I don't know how feasible it is but have you tried moving the TV nearer to the eero to see if it's a wifi range issue?
Chris
Chris, Community Team
Our latest Blog l Share your Ideas l Service Status l Help with your Service l Community Stars l Set your preferences
Monday
Always wifi with previous router as it's in the bedroom and no ethernet going up there from down stairs.
Wifi signal was full bars with previous router.
Monday
Thanks, and you definitely connected it by wifi to your previous router and not Ethernet cable?
Chris
Chris, Community Team
Our latest Blog l Share your Ideas l Service Status l Help with your Service l Community Stars l Set your preferences
Monday
It's an LG model: 29MT31S-PZQ
Monday
What's the model number of your TV?
Chris
Chris, Community Team
Our latest Blog l Share your Ideas l Service Status l Help with your Service l Community Stars l Set your preferences
Monday
No wifi shows up to connect to. I have disabled the 5ghz band temporary to see if that helped. I have reset TV many times.
Monday
Thanks. What happens when you try to connect the TV, do you get an error message?
Chris
Chris, Community Team
Our latest Blog l Share your Ideas l Service Status l Help with your Service l Community Stars l Set your preferences
Monday
Yes everything was fine before the eero.
Monday
Hi aaronjunited,
Just to confirm, has the TV connected OK with a previous router?
Chris
Chris, Community Team
Our latest Blog l Share your Ideas l Service Status l Help with your Service l Community Stars l Set your preferences
Sunday
OK, thanks for trying that. Let's see if the support team can help further.
Sunday
Thank you for your response. I tried this a few times. I hard reset the TV and restarted router. Still no connecting.