cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

FIbre Support

Get expert support with your Fibre connection.

Line still faulty?

iustitia
Repeat Guest
Private Message TalkTalk
Message 22 of 22

Was having very slow speeds, ran the line test and it detected a fault on the line. The engineer came and supposedly fixed it but it's still exactly the same.

0 Likes
21 REPLIES 21

Message 1 of 22

Hi

Engineer paid a visit, everything working as it should.

Thank you.

0 Likes

Message 3 of 22

Ok, thanks.

 

0 Likes

Message 4 of 22

Thanks. Line test is still failing so I've raised this to Openreach as a non-appointed task. Openreach will investigate over the next few days and may contact you directly if they need to access your home


Chris

0 Likes

Message 5 of 22

You can run the test anytime.

Thanks.

0 Likes

Message 6 of 22

Hi,

Ok, connected to the test socket now. Still getting the same slow speeds

which have dropped to 15Mbs down 10Mbs up.

0 Likes

Message 7 of 22

Hi @iustitia 

 

Ok, thanks. As soon as the router is at the test socket then I will run the line tests.

0 Likes

Message 8 of 22

Post back to let staff know when you have managed to set it up at the test socket.

 

They are on here early in the morning till mid afternoon, Monday to Friday, so they'll let you know the test result any time they have reached your thread if you can confirm you're set up with it at the test socket. 

 

It doesn't take much time to actually run the tests, but let them know what time is NOT convenient  - there'll be a little while of down time while they are testing, @iustitia, and you don't want that happening in the middle of you trying to get something important done.

Gliwmaeden2, a fellow customer.
0 Likes

Message 9 of 22

Hi

Sorry not at home right now, will let you know when i can do it.

 

0 Likes

Message 10 of 22

Hi @iustitia 

 

Please can you connect the router at the test socket just whilst I run another line test? If the same fault is detected then I can pass this straight over to Openreach to be investigated by a line engineer.

 

Thanks

 

Debbie

0 Likes

Message 11 of 22

It's worth checking whether your master socket has a test socket, @iustitia. The various types are explained here:

 

https://community.talktalk.co.uk/t5/Articles/Your-guide-to-main-phone-sockets/ta-p/2205432

 

Staff will need to run tests with the router at the test socket to eliminate certain factors from the diagnosis of the problem. 

Gliwmaeden2, a fellow customer.
0 Likes

Message 12 of 22

HI,

no it isn't

0 Likes

Message 13 of 22

Hi @iustitia 

 

The line test is detecting a potential fault. Is the router currently connected at the test socket?

0 Likes

Message 14 of 22

Hi

About 15Mbps up and about 20Mbps down.

0 Likes

Message 15 of 22

Hi justitia,

 

What speeds are you getting when you run the speed test?

Chris

0 Likes

Message 16 of 22

Please check back for a reply from staff after the weekend, @iustitia.

Gliwmaeden2, a fellow customer.
0 Likes

Message 17 of 22

My speed is actually getting slower. Is it possible to get another

line test?

0 Likes

Message 18 of 22

Yes for the full 30 min and i'm using a wired connection to my desktop.

0 Likes

Message 19 of 22

Hi @iustitia 

 

Just to confirm, was the router switched off for a full 30 minutes?

 

Are you able to run a wired speed test?

0 Likes

Message 20 of 22

Tried this. My speed is still less than half.

0 Likes