cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

FIbre Support

Get expert support with your Fibre connection.

Router Interference

GraemeMcD
Conversation Starter
Private Message TalkTalk
Message 51 of 51

Hi

Seem to be getting some kind of interference on the Router (Wifi Hub).

Generally Fibre35 gives me a solid 12-17 Ping with 30Mbps down 6Mbps up.

However I keep getting intermittent drops to 500+ Ping with single figure Mbps down and less than one Mbps up.  Particularly noticeable on XBox with online games dropping out or lagging badly.

Tried both Wifi and direct Ethernet connection between Xbox and Router and it seems to persist.

I may have narrowed it down to either or both of TV (older plasma) and/or Sky HD box but it's so intermittent its difficult to be certain. 

It also happened a couple of years ago and a replacement router seemed to fix it until now, could it be this replacement router has developed a similar issue?

Grateful for any ideas!

 

 

Graeme McDowell
0 Likes
50 REPLIES 50

Message 1 of 51

Thank you so much @KeithFrench for your support. 

0 Likes

KeithFrench
Community Star
Private Message TalkTalk
Message 2 of 51

Hi @GraemeMcD 

 

You have a Huawei router & that is a bit of the problem, inasmuch as it is old. If you have the current Sagemcom router (aka WiFi Hub 3), then you can turn it into a WiFi 6 mesh network with a Sagemcom WiFi Booster (FAST266), which is very good. It can connect back to the WiFi Hub 3 over WiFi or Ethernet. This being a mesh network, it will manage the interference, although you might be better off in your case, as you suggested, connecting them together via an Ethernet cable. However, to get this router for free, you would have to take out a new contract or at least be in the last four months of your existing one. The booster, if still on offer, is £30.

 

I have tested this scenario extensively & can provide any required technical support on it.

 

Your best bet here (if you are interested) is to contact the Better Value Team (old Legacy Dept), please call:  0345 1725157. 

Opening hours:-
Monday to Friday 09:00 to 19:00
Saturday 09:00 to 18:00
Sunday Closed

 

If you don't want that, you could look at something like this:-

 

TP-Link TL-WPA7617 KIT AV1000 Powerline Adapter WiFi Extender, WiFi 1200Mbps, Ethernet Ports, Powerl...TP-Link TL-WPA7617 KIT AV1000 Powerline Adapter WiFi Extender, WiFi 1200Mbps, Ethernet Ports, Powerl...

 

Please note: this is a bit old itself, as it only supports WiFi 5 and is more expensive than the Sagemcom mesh solution, based on getting a WiFi hub for free with a renewed contract & buying the Sagemcom booster. I have never tested this TP-Link product, so I don't know what it is like. It will require both units to be connected to the same electrical ring circuit, as it uses power line technology to connect them.

Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they? 

0 Likes

Message 3 of 51

@GraemeMcD 

It’s great to hear that unplugging the extender has already improved the reliability a bit. Once you’re able to disable the water softener’s Wi‑Fi broadcast, that should reduce interference further, especially on the 2.4GHz band.
 

Regarding extending coverage upstairs without causing interference — yes, there are alternatives that connect via Ethernet rather than rebroadcasting over Wi‑Fi. These usually work much more reliably because they avoid any wireless backhaul issues.

0 Likes

Message 4 of 51

Thank you getting back to us.

0 Likes

Message 5 of 51

Ok - investigating with the supplier how to disable the water softener's wifi.

 

Have set the router to ch6 rather than auto.

 

Now we're back to having a wifi dead zone upstairs with the extender unplugged to avoid interference - is there an alternative extender that would ethernet cable to the TalkTalk router that we could put into the problem room, that way it would hopefully be far enough away to limit interference.  The extender I have, tp-link RE700X AX3000, doesn't do it.

Graeme McDowell
0 Likes

Message 6 of 51

Thanks for helping out @KeithFrench.

0 Likes

KeithFrench
Community Star
Private Message TalkTalk
Message 7 of 51

Hi @GraemeMcD 

 

Anything that broadcasts an SSID in the 2.4GHz WiFi band that is unnecessary is very bad news. I would turn it off if possible. You cannot use channel 2 on your router; only 1, 6 or 11 should ever be selected.

Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they? 

0 Likes

Message 8 of 51

Hi there @GraemeMcD Thank you for the reply.


@KeithFrench will offer more support when he sees this.

0 Likes

Message 9 of 51

Keith - apologies - completely missed this reply!

 

The extender is the former type. It's now unplugged!

 

The SSID named H2O is, bizarrely, our water softener which is wifi enabled, although we don't use that feature and we have no devices connected to it, it merely broadcasts its SSID.  Could it still be causing a problem? Particularly if I force the router to ch2?

 

Overall I'd say the wifi is a little more reliable after unplugging the extender, with occasional ping surges and speed drops, the online gaming through XBox live is still very laggy (but that's likely the separate issue which you've already highlighted back to TalkTalk).

 

 

Graeme McDowell
0 Likes

Message 10 of 51

I appreciate your assistance @KeithFrench 

0 Likes

KeithFrench
Community Star
Private Message TalkTalk
Message 11 of 51

Yes, the extender is causing the problem. Not knowing the model number of it, is it the type that connects back to the router over the router's WiFi, or is it using Power Line Technology to connect back to a LAN port on the router? If it is the former, then its interference will cause all devices connected to it at the time to intermittently drop out, because it not only transmits a fresh signal out from it, but it acts as a client to the router's WiFi and the router's WiFi signal gets cancelled out by this, causing mayhem for all wireless devices.

 

Yes, lock the router's 2.4GHz WiFi to channel 11, as that looks the best. There is a network whose SSID starts with H2 on channel 3, which will interfere with both channels 1 & 6, not leaving you much choice.

Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they? 

0 Likes

Message 12 of 51

Current router (my old one) is a DG8041W-2.5T - the newer one which i had to switch out due to the devices dropping out is a FAST 5346-3.T8 (see message #24).

Interesting point about the extender! it's on the landing upstairs so nowhere near the router, got it to extend the signal into the  bedrooms furthest from the router - ironic that it may be a problem!  The only way to get them further apart would be to put the extender into the rooms I'm trying to extend to - so would seem pointless having it!!  Could the interference with the extender have caused the issue with the FAST5346??

I'll switch it off and monitor.

Shall I force the router onto 1,6 or 11?

Graeme McDowell
0 Likes

Message 13 of 51

Thank you for the support @KeithFrench 

0 Likes

KeithFrench
Community Star
Private Message TalkTalk
Message 14 of 51

Hi @GraemeMcD @mandisa1-TT 

 

There are a couple of issues here:-

  1. Your router (Is it a Huawei HG633/635 or DG8041W), is using channel 8 in the 2.4GHz band. That is an overlapping channel which should not be used. The only ones that can be used within the 2.4GHz band are channels 1, 6 or 11).
  2. There is not enough of a gap in signal strength between the router and your TP-Link extender, as they both use the same channel group 36 - 48. This will lead to Wi-Fi dropouts. The router's SSID is only 5dBm higher than that of the TP-Link where your PC is. There needs to be a 20dB gap in signal strength between the two. Is the TP-Link extender in the same room as the router or nearby? They need to be further apart. 

Have you tried this with the TP-Link turned off? If I find anyother problems from further investigation, I will let you know.

Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they? 

Message 15 of 51

Thank you so much @KeithFrench, I will have to note this on our end. Please do keep us updated on the findings

0 Likes

KeithFrench
Community Star
Private Message TalkTalk
Message 16 of 51

Hi @mandisa1-TT

 

The problems are unlikely to be a TalkTalk responsibility (unless I prove that the router is faulty). I will hopefully start work on the WiFi analysis this afternoon.

Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they? 

Message 17 of 51

Hi there @KeithFrench I have escalated this, however still required to complete diagnostics checks.

0 Likes

KeithFrench
Community Star
Private Message TalkTalk
Message 18 of 51

Hi @siphosethu-TT 

 

You do not need to do anything. 

 

@GraemeMcD has just sent me some diagnostic info with regards to the WiFi problem. 

 

@Mandisa-TT has escalated the other problem (an internet backbone router beyond the TalkTalk network) to you networks department in her post #26.

Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they? 

Message 19 of 51

Hi there @GraemeMcD, please confirm if the support provided by @KeithFrench might have helped? If not please respond back so we can run checks on this for you.

0 Likes

Private Message TalkTalk

Message 20 of 51

Here you go.....

Graeme McDowell
0 Likes