FIbre Support

Get expert support with your Fibre connection.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Port Forward 44158

Kaloyan
First Timer
Message 2 of 2

Hello 

 

I have 

problem with Talktalk router

 

I need port 44158 open for bobcat miner to work properly , its connected with LAN cable so its givin me auto 192.168.1.10 but i reserve it anyway and then i go on port forward to add rule for 192.168.1.10 to open port 44158 but no luck so far , ive make few screenshots hopefully im missing something

 

PS - firewall it was on medium which is blocking NETBIOS and im not sure if that is related so i put firewall on low - allow all  and on portchecker.co  still says "closed"   Please help , thanks

 1.jpg2.jpg3.jpg4.jpg5.jpg6.jpg7.jpg8.jpg

0 Likes
1 REPLY 1

KeithFrench
Community Star
Message 1 of 2

That rule will never work because you have set an external host to the local IP address of the device. This field needs to be left at its default of *.

 

There is no need to change the firewall on the router at all.

 

This port forwarding rule works perfectly:-

 

PF TCP 44158.png

Keith
I am not employed by TalkTalk, I'm just a customer. If my post has fixed the issue, please set Accept as Solution from the 3 dot menu.
TalkTalk support and Community Stars - Who are they?